Views fo conical (cylindrical) surfaces nad cones (cylinders)
Conical (cylindrical) surface is determined by the basic curve (usually a circle) and a main vertex, which is a real point V
(ideal point
V, direction of all lines on the surcface).View of the surface can be determined by the view of the basic curve and by views of the contoure line segments on the surface patch
forming the view outline (obr. 2.65).
Let the ground view of the point L on the surface be given. Line h is passing through the point L on the surface. Front views of a couple of lines h and h´ on the surface sharing the common ground views h1 = h1´ can be determined by the intersection points of these lines and basic circle of the surface, which are traces of lines. Ground views of points L and L´ are located on the ground views of lines. Axonometric views of points L and L´ can be determined on the axonometric views of lines. Tangent plane t in the point L on the conical (cylindrical) surface is formed by the line h passing through the point L on the surface and the tangent line (which is one plane trace) to the basic circle in its common point with the line h . Normal n is perpendicular to the tangent plane t.
V.Intersection figure of the plane s and cylindrical surface V ca be:
1. one line on the surface (tangent plane),
2. a pair of lines on the surface,
3. an empty set.
Centre of the intersection curve is located on the axis of the cylindrical surface.
Any two planar intersections on the cylindrical surface by planes a and a´, which are not direction planes,
are related in the axial affinity with the axis in the intersection line of the two planes a and a´.
Direction of affinity is determined by the direction of lines on the cylindrical surface
and a pair of corresponding points is in the centres of the intersection curves,
which are intersection points of the intersection plane and the surface axis (obr. 2. 72).
in the direction not parallel to any of the two intersection planes a, a´,
nor to the direction of the surface lines, are two ellipses
(or two circles, or a circle and an ellipse),
which are related in the axial affinity correspondence.
Axis of the axial affinity is the view of the intersection line of planes a and a´
and direction of affinity is in the view of the surface axis.
Views of the centres of intersection curves on the surface axis
form the pair of corresponding points in affinity.
Basic circle of the cylindrical surface is the planar intersection
usually by some of the image planes,
therefore the intersection by the plane a is the affine image of the surface basic circle.
Intersections of conical surfaces
Plane passing through the vertex V of the conical surface is vertex plane.Vertex plane s can intersect conical surface in the following figures:
2. one line on the surface (tangent plane),
3. two lines on the surface.
(or a circle, if it is parallel to the plane of the surface basic circle).
Type of the intersection conic section is determined by the form of the intersection figure by the vertex plane s parallel to the intersection plane.
Intersection curve of the conical surface by the plane a is:
b) a parabola, if the intersection figure is a line, s Ç K = l, a Ç K = p
c) a hyperbola, if the intersection figure is a pair of lines, s Ç K = l, j, a Ç K = h
in the direction not parallel to any of the two intersection planes a and a´,
are two conic sections (or a conic section and a circle),
which are related in the central collineation.
Centre of this collineation is the view of the conical surface vertex,
axis is in the view of the intersection line of planes a and a´.
Views of intersection points of one surface line and planes a and a´
form a pair of corresponding points in this central collineation.
Basic circle of the conical surface is usually a planar intersection by some of the image planes,
therefore the inersection conic section by the plane a is a collinear image of the basic circle.
Orthographic view of the ellipse located on the conical surface of revolution
into the plane perpendicular to the surface axis is an ellipse with one focus in the view of the surface vertex (obr. 2.77).
Front view of the intersection ellipse is a line segment A2B2, with the end points mapped to the major vertices of the intersection ellipse ground view, located on the intersection plane slope line of the first frame.
Centre of the intersection ellipse is in the centre of the line segment AB.
Minor vertices C and D of the intersection ellipse ground view are located on the principal line of the first frame passing through the centre O of the ellipse.
V1 is the focus of the intersection ellipse ground view.
The intersection ellipse is entirely visible in the ground view.
Axonometric view of the intersection is determined by the conjugate diameters AB, CD.
Diameter AB is located on the slope line of the first frame 1s of the intersection plane a.
Vertex plane s = V 1s intersects conical surface in two lines intersecting line 1s in points A, B on the intersection.
Centre O of the line segment AB is the centre of the intersection.
Conjugate diameter to the diamater AB of the intersection ellipse is located on the principal line p of the first frame.
Plane s = Vp intersects conical surface in lines CV and DV, while points C and D are located on the line p.
Visibility can be determined by the intersection points E, F of the intersection plane and outlines of the conical surface.
Parallel vertex plane is a tangent plane to the conical surface.
In the obr. 2.79, the parabolic intersection on the conical surface of revolution by the plane a is illustrated in the Monge method.
Vertex plane s || a is tangent to the conical surface of revolution in the ouline of the surface front view.
Trace of the vertex plane s in the ground image plane is the tangent line to the basic circle k.
Trace of the intersection plane a intersects circle k in the end points of the parabolic segment of intersection.
Front view of the intersection plane is the line a2 intersecting the outline of the conical surface front view in the point M2,
which is the extremal point of the parabolic intersection with respect to its distance from the ground image plane.
Front view of this point is located on the slope line of the first frame 1s1 in the intersection plane,
which mappes to the axis of the intersection ground view.
Vertex of the conical surface of revolution mappes in the ground view to the focus of the intersection parabola ground view.
Tangent lines to the intersection parabola in the points K, L can be attached with respect to the property of subtangent.
Axonometric view (obr. 2.80) of the parabolic intersection on the conical surface of revolution by the plane a perpendicular to the frontal plane can be determined by the slope line of the first frame 1s in the intersection plane, which is in the direction of the intersection parabola axis and intersects surface in the point M located in the maximal distance from the ground image plane.
Tangent lines to the intersection parabola in the points K, L can be determined by the property of subtangent,
their common intersection point R is located on the line 1s.
Point of the change of visibility of the intersection curve is the intersection point of the ouline and the intersection plane and can be determined easily in the front view. Orthographic view of a hyperbola on a conical surface of revolution onto the plane perpendicular to the surface axis is a hyperbola with one focus in the view of the surface vertex.
Vertex plane s is passing through the surface vertex V parallelly to the intersection plane a and intersects surface in a pair of lines.
These lines determine the directions of intersection hyperbola asymptotes 1a, 2a.
Slope line of the first frame 1s in the intersection plane mappes to the gound view as the axis of the intersection hyperbola ground view,
its intersection points A, B with the surface are mapped to the ground views as major vertices of the intersection hyperbola ground view.
In the front view, A2 is the point on one branch of the intersection hyperbola located in the greatest distance from the ground image plane,
B2 is the point on the other branch of the intersection hyperbola located in the smallest distance from the ground image plane.
Ground view of the conical surface vertex is the focus of the intersection hyperbola ground view.
Other points located on the intersection hyperbola, K, K´, L, L´ are located on circles k, k´ and on the trace pa and principal line of the first frame in the intersection plane.
All points of the intersection hyperbola located on one branch are visible in the ground view, while the other branch is entirely invisible.
In the orthogonal axonometry on the obr. 2.82, the hyperbolic intersection on the conical surface of revolution by the plane a perpendicular to the front image plane is illustrated. Tangent point E of the intersection hyperbola axonometric view to the surface outline can be determined on this line in the front view, where the intersection plane appears in the edge view.
No comments:
Post a Comment